FANUC 20 CHIN HUNG CL-560/CL-650 Series with Internal Combustion Engine

FANUC Series 20-TA...For manual lathe Interpolation

Item	Specification	Series 20
		TA
		Guidance programming
		With-out	With
Positioning	G00	ЁД	ЁГ
Single direction positioning		Ђw	Ђw
Exact stop mode	G61	Ђw	Ђw
Exact stop	G09	Ђw	Ђw
Linear interpolation		ЁД	ЁГ
Circular interpolation	Multi-quadrant is possible	ЁГ	ЁИ
Dwell (per sec)		ЁД	ЁГ
Helical cutting		Ђw	Ђw
Thread cutting, synchronous cutting		ЁД	ЁГ
Skip function	G31	ЁД	ЁГ
Reference position return	G28	ЁД	ЁГ
Reference position return check	G27	ЁД	ЁГ
2nd reference position return		ЁД	ЁГ

Feed Function

Item	Specification	Series 20
		TA
		Guidance programming
		With-out	With
Rapid traverse rate	240 m/min (1Ѓgm)	ЁГ	ЁГ
Rapid traverse override	F0, 25, 50, 100%	ЁГ	ЁГ
Feed per minute	mm/min	ЁГ	ЁГ
Feed per revolution	mm/rev	ЁГ	ЁГ
Tangential speed constant control		ЁГ	ЁГ
Cutting feedrate clamp		ЁГ	ЁГ
Automatic acceleration /deceleration	Rapid traverse: linear, Cutting feed: exponential	ЁГ	ЁГ
Linear acceleration /decleration after cutting feed interpolation		ЁИ	ЁИ
Feedrate override	0~254%	ЁГ	ЁГ
Jog override	0~655.34%	ЁГ	ЁГ
Override cancel		ЁГ	ЁГ
Manual synchronous feed		ЁГ	ЁГ

Note:	ЁГ: Standard ЁИ: Option ЁЖ: Function included in another option Ђw: Not available ЁД: Available standard function by macro executer of machining guidance function or with guidance programming. ЁЙ : Available option function by macro executer of machining guidance function or with guidance programming.
Ё@
Page 6 Page Up Page Down

For further information, please contact:

Taiwan Combitech Co., Ltd.

160 Huei-Chung Road Taichung 407 Taiwan

Tel: +886 2311-2413

Fax: +886 2311-2415

Vietnam Representative Office

356/6/12 Bach Dang Street, Ward 14

Binh Thanh District, Ho Chi Minh City, Vietnam

Tel: (84-8)551 2576

Fax: (84-8)294 2848

Email: combitech@hcm.fpt.com.vn

Ё@