FANUC 20 CHIN HUNG CL-560/CL-650 Series with Internal Combustion Engine

FANUC Series 20-TA...For manual lathe Program Input

Item	Specification	Series 20 TA
		Guidance programming
		With-out	With
EIA/ISO automatic recognition		ЁД	ЁГ
Lable skip		ЁГ	ЁГ
Parity check	Horizontal and vertical parity	ЁГ	ЁГ
Control in/out		ЁГ	ЁГ
Optional block skip	1	ЁД	ЁГ
Max. programmable dimension	Ёг8-digit	ЁГ	ЁГ
Program number	04-digit	ЁД	ЁГ
Sequence number	N5-digit	ЁД	ЁГ
Absolute/incremental programming	Combined use in the same bloke	ЁД	ЁГ
Decimal point input/pocket calculator type decimal point intput		ЁД	ЁГ
Input unit 10 time multiply		Ђw	Ђw
Diameter/radius programming (X axis)		ЁД	ЁГ
Plane selection	G17, G18, G19	Ђw	Ђw
Coordinate system setting		ЁД	ЁГ
Automatic coordinate system setting		ЁГ	ЁГ
Coodrdinate system shift		ЁД	ЁГ
Direct input of coordinate system shift		ЁД	ЁГ
Workpiece coordinate system	G52, G53, G54~G59	Ђw	Ђw
Manual absolute on/off		ЁД	ЁГ
Chamfering, corner R		ЁЙ	ЁИ
Programmable data input		ЁЙ	ЁИ
Sub program call		ЁД	ЁГ
Custom macro B		ЁЙ	ЁИ
Canned cycles		ЁД	ЁГ
Canned cycles for drilling		Ђw	Ђw
Radius designation on arc		ЁД	ЁГ
Scaling		Ђw	Ђw
Coordinate system rotation		Ђw	Ђw
Macro executer A		ЁД	ЁГ
Macro executer B		ЁЙ	ЁИ
Machining guidance function		ЁГ	ЁГ
Guidance programming function		Ђw	ЁИ
G code system A		ЁД	ЁГ
G code system B/C		ЁЙ	ЁИ

Note:	ЁГ: Standard ЁИ: Option ЁЖ: Function included in another option Ђw: Not available ЁД:Available standard function by macro executer of machining guidance function or with guidance programming. ЁЙ :Available option function by macro executer of machining guidance function or with guidance programming.
Ё@
Page 7 Page Up Page Down

For further information, please contact:

Taiwan Combitech Co., Ltd.

160 Huei-Chung Road Taichung 407 Taiwan

Tel: +886 2311-2413

Fax: +886 2311-2415

Vietnam Representative Office

356/6/12 Bach Dang Street, Ward 14

Binh Thanh District, Ho Chi Minh City, Vietnam

Tel: (84-8)551 2576

Fax: (84-8)294 2848

Email: combitech@hcm.fpt.com.vn

Ё@