FANUC 20 CHIN HUNG CL-560/CL-650 Series with Internal Combustion Engine

FANUC Series 20-TA...For manual lathe Auxiliary/Spindle Speed Function

Item	Specification	Series 20 TA
		Guidance programming
		With-out	With
Miscellaneous function	M8-digit	ЁД	ЁГ
Auxiliary function lock		ЁД	ЁГ
High-speed M. S. T interface		ЁД	ЁГ
Multiple command of auxiliary function	3	ЁД	ЁГ
Spindle speed function	S5-digit, binary output	ЁД	ЁГ
Spindle serial output	S5-digit, serial output	ЁЙ	ЁИ
Spindle analog output	S5-digit, analog output	ЁЙ	ЁИ
Spindle override	0~254%	ЁЖ	ЁЖ
Constant surface speed control		ЁД	ЁГ
Analog voltage control by PMC		ЁЖ	ЁЖ
1 st spindle orientation		ЁИ	ЁИ
1 st spindle output switching		ЁИ	ЁИ
Rigid tap		Ђw	Ђw

Tool function / Tool compensation

Item	Specification	Series 20 TA
		Guidance programming
		With-out	With
Tool function	T7 + T6 + 2	ЁД	ЁГ
Tool function	T8 digit	Ђw	Ђw
Tool offset memory	Ёг6- digit, 16 pairs	ЁД	ЁГ
Tool offset memory	Ёг6- digit, 32 pcs.	Ђw	Ђw
Tool length compensation	G43, G44, G49	Ђw	Ђw
Tool offset		ЁД	ЁГ
Cutter compensation C		Ђw	Ђw
Tool nose radius compensation		ЁЙ	ЁИ
Tool geometry/wear offset		ЁЙ	ЁИ
Tool offset value counter input		ЁД	ЁГ
Input of offset value measured A		ЁД	ЁГ

Editing Operation

Note:	ЁГ: Standard ЁИ: Option ЁЖ: Function included in another option Ђw: Not available ЁД:Available standard function by macro executer of machining guidance function or with guidance programming. ЁЙ :Available option function by macro executer of machining guidance function or with guidance programming.
Ё@
Page 8 Page Up Page Down

For further information, please contact:

Taiwan Combitech Co., Ltd.

160 Huei-Chung Road Taichung 407 Taiwan

Tel: +886 2311-2413

Fax: +886 2311-2415

Vietnam Representative Office

356/6/12 Bach Dang Street, Ward 14

Binh Thanh District, Ho Chi Minh City, Vietnam

Tel: (84-8)551 2576

Fax: (84-8)294 2848

Email: combitech@hcm.fpt.com.vn

Ё@